Care & Cleaning Guide
Regular care helps preserve the appearance and long-term performance of your shower glass and hardware.
This guide explains how to clean standard glass, Redleys Easy-Clean treated glass, chrome hardware and decorative finishes safely, while helping to reduce the build-up of limescale, soap residue and water marks.
Caring for Standard Glass
Standard untreated glass requires regular cleaning to prevent the build-up of limescale, soap residue, and water marks.
Daily Care
For best results after each use:
-
Rinse the glass with clean water
-
Remove excess water using a squeegee
-
Dry with a soft microfibre cloth
Periodic Cleaning
Clean the glass regularly using:
-
Warm water with a mild soap solution
-
A non-abrasive glass cleaner suitable for shower glass
After cleaning:
-
Rinse thoroughly with clean water
-
Dry using a soft cloth
Avoid Using
The following products may damage the glass surface or surrounding finishes:
-
Abrasive cleaning pads
-
Scouring creams
-
Acidic descalers
-
Bleach-based cleaners
-
Razor blades or scrapers
-
Strong alkaline cleaning products
Use of unsuitable cleaning products may reduce the effectiveness of the coating and invalidate the guarantee.
Please see our Guarantees & Warranties page for full details of product cover.
Caring for Redleys Easy-Clean Glass
Redleys Easy-Clean is an advanced glass protection treatment designed to reduce staining and minimise residue adhesion.
While maintenance is still required, treated glass is generally easier to keep clean than untreated glass.
Daily Care
After each use we recommend:
-
Rinsing the glass with clean water
-
Removing excess water using a squeegee or soft cloth
-
Drying with a clean microfibre cloth
Periodic Cleaning
Occasional cleaning should be carried out using:
-
Warm water and mild soap
-
A non-abrasive cleaner suitable for treated shower glass
Always rinse thoroughly after cleaning.
Important Care Information
To preserve Redleys Easy-Clean™ coating, avoid:
-
Acidic cleaning products
-
Abrasive pads or creams
-
Bleach or solvent-based cleaners
-
Strong alkaline products
-
Cleaning products with a pH value above 8
-
“Leave-on” cleaning sprays
-
Razor blades or sharp tools
Use of unsuitable cleaning products may reduce the effectiveness of the coating and invalidate the guarantee.
For full information about the coating, its performance and Protection Guarantee, see our Redleys Easy-Clean Glass Coating Guide.
Caring for Chrome Hardware
Chrome finishes should be cleaned regularly to maintain their polished appearance.
Recommended Cleaning
-
Wipe regularly with a soft damp cloth
-
Dry thoroughly after cleaning
-
Use mild soap and warm water where required
Avoid Using
Do not use:
-
Abrasive cloths or pads
-
Metal polish
-
Acidic cleaners
-
Bleach-based products
-
Harsh chemical sprays
Allowing standing water, soap residue or limescale deposits to remain on chrome surfaces may result in staining or deterioration over time.
Caring for Decorative Finishes
Decorative finishes require gentle cleaning to maintain the integrity of the surface coating.
This includes:
-
Brushed Brass
-
Matt Black
-
Brushed Nickel
-
Brushed Bronze
-
Polished Gold
-
Polished Gun Metal
-
Brushed Gun Metal
-
Polished Rose Gold
-
Matt Brushed Copper
Recommended Cleaning
-
Clean using a soft microfibre cloth
-
Use warm water and mild soap only
-
Dry immediately after cleaning
Important Care Information
Decorative finishes require more careful maintenance than chrome and should be cleaned regularly using only suitable cleaning methods.
Avoid:
-
Abrasive materials
-
Chemical cleaners
-
Vinegar-based products
-
Limescale removers
-
Solvent-based sprays
-
Bleach or acidic cleaners
Failure to follow these guidelines may result in surface damage, discolouration, or deterioration of the finish.
General Maintenance Recommendations
To help maintain your enclosure in optimal condition:
-
Ventilate the bathroom after showering
-
Remove excess moisture regularly
-
Clean little and often to avoid heavy build-up
-
Avoid allowing limescale deposits to accumulate
-
Always use non-abrasive cleaning materials
Properties with hard water or water softening systems may experience increased water spotting. Regular drying of glass surfaces with a squeegee or microfibre cloth is strongly recommended.
Regular care will help preserve both the appearance and long-term performance of your Redleys shower enclosure.
Common Questions
How do you keep shower glass clean?
Regular rinsing, drying with a squeegee, and routine cleaning with non-abrasive products help maintain clean shower glass.
Does Easy-Clean glass need cleaning?
Yes. Easy-Clean helps reduce residue and limescale build-up, but regular maintenance is still recommended.
Can I use vinegar on shower glass?
We do not recommend vinegar or acidic cleaners on treated glass or decorative hardware finishes.
What is the best way to clean shower glass?
Use warm water, mild soap, and a soft microfibre cloth or squeegee.
Can abrasive cleaners damage shower enclosures?
Yes. Abrasive pads and harsh chemicals can damage glass coatings and hardware finishes.
Are the hardware finishes covered by a guarantee?
Yes — all hardware components are covered by our guarantee against manufacturing defects.
View Guarantees & Warranties
Can limescale damage shower glass?
Over time, heavy limescale build-up can stain or mark glass surfaces if not regularly removed.
Is Easy-Clean coating permanent?
No. The coating is long-lasting but its performance will vary depending on maintenance and water conditions.
Can I use glass cleaner on Easy-Clean glass?
Only mild, non-abrasive cleaners suitable for treated glass should be used.
How often should shower glass be cleaned?
Light cleaning after each use and periodic deeper cleaning is recommended for best results.